Ricoh CL7200 Setup Guide - Page 168
PostScript 3 Printer Driver, Next >, Local printer, Create a new port, SmartDeviceMonitor
UPC - 026649024115
View all Ricoh CL7200 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 168 highlights
Preparing for Printing C Select an interface language, and then click [OK]. The default interface language is English. ❒ The printer driver with the selected language will be installed. The English printer driver is installed when the following language is selected: Cestina, Magyar, Polski, Portugues, Suomi. D Click [PostScript 3 Printer Driver]. Add Printer Wizard starts. E Click [Next >]. F Click [Local printer], and then click [Next >]. G Click [Create a new port:]. H Click [SmartDeviceMonitor], and then click [Next >]. I Click [IPP]. J In the [Printer URL] box, enter "http://(printer's address)/printer" as the printer's address. If the server authentification is issued, to enable SSL (a protocol for encrypted communication), enter "https://(printer's address)/printer" (Internet Explorer 5.01, or a higher version must be installed). (example IP address: 192.168.15.16) http://192.168.15.16/printer https://192.168.15.16/printer You can enter "http://(printer's address)/ipp" as the printer's address. K Enter a name for identifying the printer in [IPP Port Name]. Use a name dif- ferent from the one of any existing port. If a name is not specified here, the address entered in the [Printer URL] box becomes the IPP port name. L Click [Detailed Settings] to make necessary settings. For information about the settings, see SmartDeviceMonitor for Client Help. M Click [OK]. N Check that the name of the printer driver you want to install is selected, and then click [Next >]. O Change the name of the printer if you want, and then click [Next >]. Select the [Yes] check box to configure the printer as default. P Click [Next >]. 28