Yamaha 2.0 Owner's Manual - Page 124
Dump Out, Sure?y/n, complete, P/C->KIT, > 16, UTILITY
View all Yamaha 2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 124 highlights
Feature Reference - Utility Mode " Press the START/STOP button and the LCD will display "Sure? y/n." Dump Out Sure?y/n MISC. CYMBAL SNARE KICK # Press the +1/YES button to send bulk data. The LCD will display "complete" for a moment when the operation is completed and the display will return to the original Dump Out display page. Press the -1/NO button to cancel the bulk data operation. Dump Out complete MISC. CYMBAL SNARE KICK 120 Receiving Bulk Data You can send DTX data stored in an external device back to the DTX by using bulk data reception. ! When the pattern or song is not playing, send bulk data from an external device. " When the DTX starts to receive bulk data, the following screen will appear on the LCD. Bulk in Complete MISC. CYMBAL SNARE KICK # When the DTX has completed receiving all the data, the following screen will appear on the LCD. Bulk in Complete MISC. CYMBAL SNARE KICK $ To return to the original display (before receiving bulk data), press any button or key. It is necessary to set the DTX to receive exclusive messages (P.117). It is also necessary to match the device number of the external device to the device number of the DTX (P.117). 23 P/C➔KIT (program change table) This determines the program change number that will be used to change the drum kit number from an external MIDI device or with in the DTX. ! Move the cursor to the program change number using the Q cursor buttons and set the program change number by rotating the Data Scroll Wheel or using the +1/YES and -1/NO buttons. " Move the cursor to the drum kit number and select the drum kit number by rotating the Data Scroll Wheel or using the +1/YES and -1/NO buttons. # Repeat steps ! and " and assign each program change number to the drum kits. P/C->KIT Program change number Drum kit number MISC. CYMBAL SNARE KICK 1-> 16 Settings: Program change number: 1 to 128 Drum kit number: off, 1 to 64 24 EQ (equalizer) The EQ sub-mode controls the internal equalizer settings. Select between this page and the 28th page using the PAGE¡ or PAGE⁄ buttons. Adjust the quality of the entire sound output from the DTX using the equalizer page featuring parametric type settings of 3 frequency ranges: LOW, MID, and HIGH. A Move from this page to other sub-modes by rotating the Data Scroll Wheel or using the +1/YES and -1/NO buttons. UTILITY [ MISC. CYMBAL SNARE KICK EQ ]