Yamaha 2.0 Owner's Manual - Page 131
Volume
View all Yamaha 2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 131 highlights
44 Volume This adjusts the volume of the voice assigned to the part. Balance the volume of each part when you are using the DTX as a multi-timbre tone generator. ! Move the cursor to the part number focus area and rotate the Data Scroll Wheel or use the +1/YES and -1/NO buttons to select the part number. " Move the cursor to the volume (focus area) and set the volume by rotating the Data Scroll Wheel or using the +1/YES and -1/NO buttons. # Repeat steps ! and " to set the volume for each part. 1BSUOVNCFS 7PJDFOBNF Volume = MISC. CYMBAL SNARE KICK 100 Settings: The following volume parameters can be set for parts 1 to 16. 0 to 127 Feature Reference - Utility Mode 45 Pan This sets the Pan position for each voice assigned to each part. This defines the pan position of the voice between left and right in a stereo image. ! Move the cursor to the part number focus area rotae the Data Scroll Wheel or use the +1/YES and -1/NO buttons to select the part number. " Move the cursor to the pan focus area and set the panning by rotating the Data Scroll Wheel or using the +1/YES and -1/NO buttons. # Repeat steps ! and " to set the pan of each part. 1BSUOVNCFS Pan 1BO = 0 MISC. CYMBAL SNARE KICK Settings: The following pan position can be set for the parts 1 to 16. L7 (=far left) to 0 (=center) to R7 (=far right) 127