Yamaha 2.0 Owner's Manual - Page 49

17 RIM Vel (RIM velocity) This function sets the velocity of the trigger when the rim of the pad is played. There are 2 types of settings: one where the velocity is always the same level, and the other where the velocity changes according to the impact of the attack. ! Move the cursor to the INPUT focus area and rotate the Data Scroll Wheel or use the +1/YES and -1/NO buttons to choose the input jack number. You can also enable the Learn mode (P.115) to automatically select the input jack number by hitting each pad or drum. " Move the cursor to the Velocity focus area and rotate the Data Scroll Wheel or use the +1/YES and -1/NO buttons to select the velocity. The settings vary as follows: mute Hi ....... The velocity changes according to the strength of the attack on the rim. In the same manner as the pad velocity, the velocity is automatically calculated based on the level range, velocity range and velocity curve on the 5th, 6th, and 7th display pages. The difference between"variabl"described below is that pad will be muted if the DTX receives a trigger lower than the minimum level set for level range on the 5th display page. This is convenient when you are using cymbal pads. mute Lo ....... The setting is simular to "mute Hi" above, but enables you to set the velocity at a lower level Use "mute Hi" when you are using the mute more than the rim, and "mute Lo" when you are playing the rim more than using the mute. variabl ......... The velocity changes according to the strength of the attack on the rim. In the same manner as the pad velocity, the velocity is automatically calculated based on the level range, velocity range and velocity curve on the 5th, 6th, and 7th display pages. fix1 to fix127 ..... The velocity set here remains the same regardless of the strength of the attack on the rim. The mute function cannot be used if values are set to this function. The voice trigger is faster compared to mute Hi and mute Lo. # Repeat steps ! and " to set the velocity of each input jack number. RIM Vel INPUT =mute Hi MISC. CYMBAL SNARE KICK Settings: The following parameters can be set for input numbers 1 to 8. Rim Vel mode: mute Hi, mute Lo, variabl, fix1 to fix127. Feature Reference - Drum Kit Trigger Edit Mode 18 PAD Func (pad function) This function sets the function of each pad connected to INPUT. Besides acting as a regular drum pad, various pad functions are available. For example, in Chain mode, you can move a chain step forward or backward, start or stop a pattern or song, or assign the pad to act as a switch for other types of functions. ! Move the cursor to the INPUT focus area and rotate the Data Scroll Wheel or use the +1/YES and -1/NO buttons to choose the input jack number. You can also enable the Learn mode (P.115) to automatically select the input jack number by hitting each pad or drum. " Move the cursor to the parameter and rotate the Data Scroll Wheel or use the +1/YES and -1/NO buttons to select the function. The following functions are available: normal .......... The regular setting which triggers the MIDI signal when the pad is played. click Turns the click ON or OFF. inc Selects the next drum kit number in Drum Kit mode or step in Chain mode. dec Selects the previous drum kit number in Drum Kit mode or step in Chain mode. bypass .......... Cuts the voices of all other pads except the one selected, ON or OFF. strtStp .......... Starts or stops the style pattern or song. pause Pauses the style pattern or song. do FILL ......... Changes the section to FILL. MAIN A ........ Changes the section to MAIN A. MAIN B ........ Changes the section to MAIN B. FILL AB ........ Changes the section to FILL AB. FILL BA ........ Changes the section to FILL BA. INTRO .......... Changes the section to INTRO. ENDING ....... Changes the section to ENDING. 45