Home » Yamaha Manuals » Musical Instruments » Yamaha 2.0 » Manual Viewer

Yamaha 2.0 Owner's Manual - Page 62

REV Rtn, LVL= 127

Get Yamaha 2.0 PDF manuals and user guides

Add to My Manuals
Save this manual to your list of manuals

Page 62 highlights

Feature Reference - Drum Kit Voice Edit Mode 11 Key Off When a voice with a long release is in use, sometimes a MIDI note off signal may cut the sound in an unnatural way. To prevent that, set this mode so that the DTX does not receive MIDI note off signals. Set the MIDI note off settings for each voice assigned to each MIDI note number. ! Move the cursor to the MIDI note number focus area and rotate the Data Scroll Wheel or use the +1/YES and -1/NO buttons to choose the MIDI note number. You can also enable the Learn mode (P.115) to automatically select the MIDI note number by hitting each pad or drum. " Move the cursor to the Key Off focus area and rotate the Data Scroll Wheel or use the +1/YES and -1/NO buttons. Key Off Key off MIDI note number =disable MISC. CYMBAL SNARE KICK Settings: The following parameters can be set for MIDI note number 13 to 84. disable (will not receive MIDI note), enable (will receive MIDI note) ASome sounds may have an extremely long release when the Key Off functionis disabled. In such case, press the VOICE button while holding SHIFT to temporarily stop the sound. 58 12 Out Port This sets the output of each voice assigned to each MIDI note number either to the main output or auxiliary output. This is convenient when you want to output specific voice(s) to an external mixing device. ! Move the cursor to the MIDI note number focus area and rotate the Data Scroll Wheel or use the +1/YES and -1/NO buttons to choose the MIDI note number. You can also enable the Learn mode (P.115) to automatically select the MIDI note number by hitting each pad or drum. " Move the cursor to the Out Port focus area and rotate the Data Scroll Wheel or use the +1/YES and -1/NO buttons to set the focus area. Normally select "main" and the voices are delivered through the OUTPUT jack on the rear panel. Choose aux (auxiliary) to output a specific voice such as SNARE or KICK separately, and the voices will be delivered through the AUX OUT jacks on the rear panel. Out Port Out port MIDI note number = MISC. CYMBAL SNARE KICK main Settings: The following parameters can be set for MIDI note number 13 to 84. main, aux 13 REV Rtn (reverb return) This sets the Reverb Return Level. By setting the level, you can adjust the reverb effect of the entire DTX system. The level can be set for each drum kit. Set the level by rotating the Data Scroll Wheel or using the +1/YES and -1/NO buttons. REV Rtn LVL= 127 MISC. CYMBAL SNARE KICK Settings: 0 to 127

Section	Page
Controls and Functions	10
Setting Up	13
Getting Started	17
Getting Started	18
Overall Structure and Modes	22
Drum or Percussion Sounds and Drum Kits	22
Pattern and Song	23
Triggering	24
Modes of the DTX	25
Basic Operation	26
Entering a mode	26
Tips on the LCD	29
PAGE Buttons	30
Cursor Buttons	30
Data Scroll Wheel	31
+1/YES and -1/NO Buttons	31
Transport Buttons	31
Initializing Process	31
Feature Reference	33
Drum Kit Play Mode	34
Entering Drum Kit Play Mode	34
Selecting a Drum Kit	34
Drum Kit Trigger Edit Mode	36
Entering the Drum Kit Trigger Edit Mode	36
Drum Kit Trigger Edit Mode (Page structure and operation)	37
1 Kit Name (drum kit name)	39
2 PAD Type	39
3 Auto Set	40
4 PAD Gain	40
5 LevelRng (level range)	41
6 VelRange (velocity range)	41
7 VelCurve (velocity curve)	42
8 Self Rej (self rejection)	43
9 Reject (rejection)	43
10 Spec Rej (specific rejection)	44
11 Note= (note numbers settings)	44
12 Note= (gate time)	46
13 Note= (MIDI channel)	46
14 Key On	47
15 VelXFade (velocity cross-fade)	48
16 RIMKeyOn	48
17 RIM Vel (RIM velocity)	49
18 PAD Func (pad function)	49
19 FS Func (FS function)	50
20 FS MIDI (FS MIDI channel)	51
21 FS HHcls (FS hi-hat control)	51
22 FC Func (hi-hat control function)	51
23 FC MIDI (hi-hat control channel)	51
24 FC Sens (hi-hat control sensitivity)	52
25 HH Ctrl (hi-hat control)	52
26 In 9 to 10 (input 9 to 10)	52
27 In 11 to 12 (input 11 to 12)	52
28 Copy INP (copy input)	52
29 Copy TRG (copy trigger)	53
30 Edit (edit recall)	53
31 SetChord= (setting the note number by chord)	53
Drum Kit Voice Edit Mode	54
Entering Drum Kit Voice Edit mode	55
Drum Kit Voice Edit Mode (Page structure and operation)	55
1 VCE (voice)	57
2 Volume	57
3 Pan	58
4 Pitch	58
5 Rev send (send reverb)	59
6 Modify	59
7 Filter	60
8 Decay	60
9 Key mode	61
10 AlterGrp (alternate group)	61
11 Key Off	62
12 Out Port	62
13 REV Rtn (reverb return)	62
14 REV Type (reverb type)	63
15 REV Time (reverb time)	63
16 PC Ch= (transmit program change)	63
17 BK Ch= (transmit bank select)	64
18 CC Ch= (transmit control change: volume)	64
19 CC Ch= (transmit control change: pan)	65
20 CC Ch= (transmit control change)	65
21 RootNote	66
Chain Play Mode	67
Entering the Chain Play Mode	67
Selecting a Chain	68
Switching the Steps	68
Chain Edit Mode	69
Entering the Chain Edit Mode	69
The Chain Edit Mode (Page structure and operation)	70
1 Name (chain name)	71
2 Chain create or revise	71
3 Edit recall	72
Store Mode	73
Entering Store Mode	73
Drum Kit Store Mode	73
Chain Store Mode	73
Storing Procedures	74
Copying the Drum Kit or Chain	74
Pattern Play Mode	75
The Concept of “pattern”	75
Track Structure	75
Types of Patterns	75
Style	75
Section	75
User Patterns	76
Entering Pattern Play Mode	76
Selecting a Pattern	76
Playing a Pattern	78
Volume Adjustment	79
Adjusting the Tempo	80
Click (metronome)	80
Muting or Soloing Each Track	81
Selecting the Chords	82
Pattern Record Mode	84
Recording	84
1. Getting Ready to Record	85
2. Stand-by	85
3. Selecting a Track	85
4. Selecting the Type of Recording	86
5. Setting the Tempo	86
6. Setting the Beat (time signature)	87
7. Setting the Number of Measures	87
8. Setting the Quantization	88
9. Real-time Recording	88
Step Recording (for rhythm track only)	89
Pattern Job Mode	92
Entering Pattern Job Mode	92
The Pattern Job Mode (page structure and operation)	92
1 Copy (Pat/Dest): pattern copy	94
2 Quantize (quantization)	95
3 CrTrNote (clear specific note)	95
4 ClrTrack (clears a track)	96
5 ClearPat (clear pattern)	96
6 Pgm= (selects the voices of a chord, bass or rhythm track)	96
7 Pat Name (pattern name)	96
Song Play Mode	97
The Concept of “song”	97
Track Structure	97
Sequence Tracks	97
Backing Tracks	97
Types of Songs	97
Entering Song Play Mode	98
Selecting a Song	98
Playing a Song	99
Volume Adjustment	100
Adjusting the Tempo	100
Click (metronome)	100
Muting or Soloing Each Track	101
Groove Check Function	101
Song Record Mode	103
Recording Procedures	103
1. Getting prepared	104
2. Stand-by	104
3. Selecting a Recording Track	104
Step Recording	105
Real-time Recording (Track 1 and 2 only)	109
Song Job Mode	111
Entering Song Job Mode	111
The Song Job Mode (page structure and operation)	111
1 Copy (Song/Dest): song copy	112
2 Quantize (quantization)	113
3 ClrTrack (clear track)	113
4 Clr Song (clear song)	113
5 PgmCh (select the voices for each channel)	114
6 VolCh (channel volume)	114
7 PanCh (channel pan)	114
8 PlayMode	114
9 B Lnr TR (bass linear track mode)	115
10 Pat Mute (pattern track mute mode)	115
11 SongName	115
Utility Mode	116
Entering Utility Mode	116
The Utility Mode (page structure and operation)	116
1 SYSTEM	118
2 EditMode	118
3 LinkMode	119
4 Lrn Mode (learn mode)	119
5 SldrMode (slider mode)	120
6 Bypass	120
7 JumpRcnt (jump to recent page)	120
8 FCoffset	121
9 Ma to Aux (main output to auxiliary output)	121
10 Inc Func (increase function)	121
11 Dec Func (decrease function)	121
12 MIDI	121
13 DeviceNo (device number)	121
14 Receive SysX (receiving system exclusive data)	121
15 Receive PC (receiving program change data)	122
16 RecvCh10 All (receiving MIDI channel message through channel 10)	122
17 RecvCh10 PC (receive program change through channel 10)	122
18 SendHH (send hi-hat control change)	122
19 LocalCtl (local control)	122
20 DumpTime	123
21 MergeOut	123
22 Dump Out (bulk data send)	123
23 P/C->KIT (program change table)	124
24 EQ (equalizer)	124
25 Lo Mi Hi (gain)	125
26 Lo Freq (low frequency)	125
27 Mid Freq (mid frequency)	125
28 Hi Freq (high frequency)	125
29 SEQ (sequencer)	126
30 Click Hi	126
31 Click Mid	126
32 Click Lo	126
33 ClickOut	127
34 PlyClick (play click)	127
35 Tempo	127
36 Count	127
37 GrvCheck (groove check)	128
38 Break TB (break top/bottom)	128
39 MIDIctrl (MIDI control)	129
40 SyncMode (synchronization mode)	129
41 MULTI (multi-timbre)	130
42 MastTune (master tune)	130
43 Program	130
44 Volume	131
45 Pan	131
46 Pitch	132
47 Rev Send (Reverb Send)	132
Appendix	133
MIDI	133
MIDI Data Format	138
Troubleshooting	140
Error Messages	142
Specifications	143
Index	144
Drum Voice List	147
GM Keyboard Voice List	151
Drum Kit List	152
Preset Drum Kit	152
Preset Style List	168
Preset Song List	169
Drum Kit Trigger Edit Parameter (Blank Chart)	170
Drum Kit Voice Edit Parameter (Blank Chart)	171

Match case Limit results 1 per page

Feature Reference

—

Drum Kit Voice Edit Mode

Key Off

When a voice with a long release is in use,

sometimes a MIDI note off signal may cut the

sound in an unnatural way.

To prevent that, set

this mode so that the DTX does not receive

MIDI note off signals.

Set the MIDI note off

settings for each voice assigned to each MIDI

note number.

Move the cursor to the MIDI note number

focus area and rotate the Data Scroll Wheel

or use the +1/YES and -1/NO buttons to

choose the MIDI note number.

You can also enable the Learn mode (P.115)

to automatically select the MIDI note

number by hitting each pad or drum.

Move the cursor to the Key Off focus area

and rotate the Data Scroll Wheel or use the

+1/YES and -1/NO buttons.

MISC.

SNARE

KICK

CYMBAL

Key Off

=disable

Key off

MIDI note number

Settings:

The following parameters can be set for MIDI note

number 13 to 84.

disable (will not receive MIDI note), enable (will

receive MIDI note)

Some sounds may have an extremely long release when

the Key Off functionis disabled.

In such case, press the VOICE

button while holding SHIFT to temporarily stop the sound.

Out Port

This sets the output of each voice assigned to

each MIDI note number either to the main

output or auxiliary output.

This is convenient

when you want to output specific voice(s) to an

external mixing device.

Move the cursor to the MIDI note number

focus area and rotate the Data Scroll Wheel

or use the +1/YES and -1/NO buttons to

choose the MIDI note number.

You can also enable the Learn mode (P.115)

to automatically select the MIDI note

number by hitting each pad or drum.

Move the cursor to the Out Port focus area

and rotate the Data Scroll Wheel or use the

+1/YES and -1/NO buttons to set the focus

area.

Normally select

“

main

”

and the voices are

delivered through the OUTPUT jack on the

rear panel.

Choose aux (auxiliary) to output

a specific voice such as SNARE or KICK

separately, and the voices will be delivered

through the AUX OUT jacks on the rear

panel.

MISC.

SNARE

KICK

CYMBAL

Out Port

main

Out port

MIDI note number

Settings:

The following parameters can be set for MIDI note

number 13 to 84.

main, aux

REV Rtn (reverb return)

This sets the Reverb Return Level. By setting the

level, you can adjust the reverb effect of the

entire DTX system. The level can be set for each

drum kit.

Set the level by rotating the Data Scroll Wheel

or using the +1/YES and -1/NO buttons.

MISC.

SNARE

KICK

CYMBAL

REV Rtn

LVL= 127

Settings:

0 to 127