Yamaha 2.0 Owner's Manual - Page 48
RIMKeyOn, single
View all Yamaha 2.0 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 48 highlights
Feature Reference - Drum Kit Trigger Edit Mode 15 VelXFade (velocity cross-fade) This function sets the velocity cross-fade for each input jack number on or off. When several MIDI note numbers are assigned on the 11th Note Number page and this function is on, the softer you play the pad, the 1st note is louder and the last note the smallest. The same applies to the opposite action: the harder you play the pad, the last note is louder and the first note the smallest. Case of 1ʙ5th Output velocity 120 100 80 60 40 2nd 20 1st 0 0 20 40 5th 4th 3rd 60 80 100 120 *OQVUMFWFM AThis function applies only when the key on mode on the 14th page is set to stack, stackMN, or hold. AThis function is valid only when more than 2 MIDI note numbers are assigned to note numbers 1 to 5 on the 11th display page. ! Move the cursor to the INPUT focus area and rotate the Data Scroll Wheel or use the +1/YES and -1/NO buttons to choose the input jack number. You can also enable the Learn mode (P.115) to automatically select the input jack number by hitting each pad or drum. " Move the cursor to the VelXFadefocus area and rotate the Data Scroll Wheel or use the +1/YES and -1/NO buttons to turn the function "on"or "off". VelXFade INPUT = off MISC. CYMBAL SNARE KICK Settings: The following parameters can be set for input numbers 1 to 12. VelXFade: on, off 44 16 RIMKeyOn This function sets the rim key on mode to define how the voice is triggered when the rim of the pad is played. The "single" mode is used for the usual rim shot voice and the Hold mode is used to maintain the sound. ! Move the cursor to the INPUT focus area and rotate the Data Scroll Wheel or use the +1/YES and -1/NO buttons to choose the input jack number. You can also enable the Learn mode (P.115) to automatically select the input jack number by hitting each pad or drum. " Move the cursor to the mode focus area and rotate the Data Scroll Wheel or use the +1/ YES and -1/NO buttons to select the rim key on mode from the following 2 modes: single Normal triggering of a rim shot hold The first shot maintains the voice and the second shot stops the voice. withPad ........ When the rim is hit, the sound set to the Rim and the sound set to the pad will play at the same time. # Repeat steps ! and " for each input jack number. RIMKeyOn INPUT = single MISC. CYMBAL SNARE KICK Settings: The following parameters can be set for input numbers 1 to 8. RIM Key On mode: single, hold, withPad