Yamaha CS6R Owner's Manual - Page 127
EQ LowMid Low-Middle Range, EQ Mid Middle Range, EQ HighMid High-Middle Range, EQ High, EFF Part
View all Yamaha CS6R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 127 highlights
Performance Mode peak (Peaking) + Gain 0 Frequency - Freq s Gain Set the Gain. This attenuates or boosts frequencies around the Frequency setting. t Settings: -12dB ~ 0dB ~ +12dB s Freq (Frequency) Set the center frequency. Frequencies around this point are attenuated/boosted by the Gain setting. t Settings: 32Hz ~ 2.0kHz s Q (Frequency Characteristic) This varies the signal level at the Frequency setting to create various frequency curve characteristics. t Settings: 0.1 ~ 12.0 s Freq (Frequency) Set the center frequency. Frequencies around this point are attenuated/boosted by the Gain setting. t Settings: 100Hz ~ 10.0kHz s Q (Frequency Characteristic) This varies the signal level at the Frequency setting to create various frequency curve characteristics. t Settings: 0.1 ~ 12.0 EQ High This Equalizer covers high frequencies. You can adjust the signal level at the specified frequency. You can also select different Equalizer types (Shapes). MEQíHigh) Shape Gain Freq Common peak +12dB 0.5kHz Q 12.0 s Shape Select either a Shelving or Peaking equalizer. The Peaking type attenuates/boosts the signal at the specified Frequency setting, whereas the Shelving type attenuates/boosts the signal at frequencies above or below the specified Frequency setting. t Settings: shelv (Shelving), peak (Peaking) + 0.1 12.0 0 Frequency Freq s Gain Set the Gain. This attenuates or boosts frequencies around the Frequency setting. t Settings: -12dB ~ 0dB ~ +12dB s Freq (Frequency) Set the center frequency. Frequencies around this point are attenuated/boosted by the Gain setting. t Settings: 500Hz ~ 16.0kHz EQ LowMid (Low-Middle Range) EQ Mid (Middle Range) s Q (Frequency Characteristic) This varies the signal level at the Frequency setting to create various frequency curve characteristics. EQ HighMid (High-Middle Range) t Settings: 0.1 ~ 12.0 These Equalizers cover low-to-middle, middle and highto-middle frequency ranges. They can be used to adjust the signal level around the specified frequency. LowMid MEQíLowMid) Common Gain Freq +12dB 100Hz Q 12.0 Mid MEQíMid) Common Gain Freq +12dB 100Hz Q 12.0 Common Effect You can set two types of Insertion Effects, plus two System Effects (Reverb and Chorus). The following three screens are available. EFF Part EFF Rev (Reverb) EFF Cho (Chorus) HighMid EFF Part MEQíHighMid) Common Gain Freq +12dB 100Hz Q 12.0 EFFíPart) Common ---- InsEF ---- PLG-EF part16 partP1 part10 s Gain Set the Gain. This attenuates or boosts frequencies around the Frequency setting. t Settings: -12dB ~ 0dB ~ +12dB 127