Yamaha CS6R Owner's Manual - Page 13

Basics Section Connections Connecting to External Audio Equipment Since the synthesizer has no built-in speakers, you need to monitor its sound output via external audio equipment. Alternatively, you could use a pair of headphones. There are several methods of connecting to external audio equipment, as described in the following illustrations. The CS6R also needs an external MIDI controller such as a keyboard, though this is not necessary when using the internal sequencer. For MIDI connections, see the next section. Connecting Stereo Powered Speakers A pair of powered speakers can accurately produce the instrument's rich sounds with their own pan and effect settings. Connect your powered speakers to the OUTPUT L/MONO and R jacks on the rear panel. Powered speaker (Left) Powered speaker (Right) Powered speaker (Left) Powered speaker (Right) Headphones PHONES INPUT OUTPUT L/MONO INPUT OUTPUT R C CS6x INPUT INPUT OUTPUT L/MONO OUTPUT R PHONES CS6R Headphones When using just one powered speaker, connect it to the OUTPUT L/MONO jack on the rear panel. Connecting to a Mixer There are extra audio outputs in addition to the OUTPUT (L/MONO and R) jacks. These four outputs can connect to a mixer for separately controlling the outputs of up to four Parts in Performance Mode (Page 117). You can specify the output routing of each Part in Performance Edit Mode (Page 133). 13