Yamaha CS6R Owner's Manual - Page 93
Element Filter, FLT Type Filter Type
View all Yamaha CS6R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 93 highlights
Voice Mode Element Filter You can set Filter parameters to change the tonal characteristics of each Element. The following ten screens are available. FLT Type (Filter Type) FLT HPF (High Pass Filter) FLT Sens (Filter Sensitivity) FEG VelSens (FEG Velocity Sensitivity) FEG Time FEG Level FEG Release FLT KeyFlw (Filter Key Follow) FLT Scale (Filter Scale Break Point) FLT Scale (Filter Scale Offset) FLT Type (Filter Type) s Type Set the Filter Type. Parameters will vary according to the Type. FLTíType) Type Gain Cutoff EL1234 LPF12+HPF 255 255 Reso 31 t Settings: LPF12+HPF (Low Pass Filter 12dB/oct + High Pass Filter), LPF24D (Low Pass Filter 24dB/oct Digital), LPF24A (Low Pass Filter 24dB/oct Analog), LPF18 (Low Pass Filter 18dB/oct), LPF18S (Low Pass Filter 18dB/oct Staggered), LPF6+HPF (Low Pass Filter 6dB/oct + High Pass Filter), HPF24D (High Pass Filter 24dB/oct Digital), HPF12 (High Pass Filter 12dB/oct), BPF6 (Band Pass Filter 6dB/oct), BPF12D (Band Pass Filter 12dB/oct Digital), BPFW (Band Pass Filter Wide), BEF6 (Band Elimination Filter 6dB/oct) THRU (Bypass) Filters To generalize, there are basically four types of filter: an LPF (Low Pass Filter), an HPF (High Pass Filter), a BPF (Band Pass Filter) and a BEF (Band Elimination Filter). Each available filter has a different frequency response. There are also combinations of LPF and HPF. • LPF (Low Pass Filter): This only passes signals below the Cutoff frequency. You can then use the Reso (Resonance) parameter to add further character to the sound. Six types of LPF are available. Level -6db/oct -12db/oct -18db/oct -24db/oct LPF24D (Low Pass Filter 24dB/oct Digital) A 4-pole (-24db/oct) dynamic LPF with a strong Resonance. Resonance LPF24A (Low Pass Filter 24dB/oct Analog) A 4-pole (-24db/oct) dynamic LPF with a character similar to those found on analog synthesizers. Resonance LPF18 (Low Pass Filter 18dB/oct) A 3-pole (-18db/oct) dynamic LPF. LPF18S (Low Pass Filter 18dB/oct Staggered) Also a 3-pole (-18db/oct) dynamic LPF, but with a shallower frequency curve. Resonance LPF18 LPF18S LPF12 (Low Pass Filter 12dB/oct) A 2-pole (-12db/oct) dynamic LPF, designed to be used in combination with an HPF (High Pass Filter). Resonance LPF6 (Low Pass Filter 6dB/oct) A 1-pole (-6db/oct) dynamic LPF with no Resonance, designed to be used in combination with an HPF (High Pass Filter). Cutoff Frequency 93