Yamaha CS6R Owner's Manual - Page 19

Basics Section Powering Up Power-on Procedure When you have made all the necessary connections between your synthesizer and any other devices, make sure that all volume settings are turned down all the way to zero. Then turn on the every device in your setup in the order of MIDI masters (senders), MIDI slaves (receivers), then audio equipment (mixers, amplifiers, speakers, etc.). This ensures the smooth flow of signals from the first device to the last (first MIDI, then audio). When powering down the setup, first turn down the volume for each audio devices, then switch off each device in the reverse order (first audio devices, then MIDI). When the CS6x/CS6R as MIDI receiver: POWER ON!! MIDI sender C CS6x/CS6R (MIDI receiver) 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 L R Audio equipment (first mixer, then amplifier) Switching the CS6x/CS6R On Before you switch your synthesizer on or off, first turn down the volume of any audio equipment connected to it. 1Press the POWER switch. POWER ON OFF AC INLET MEMORY PRE1 INT PLG1 DRUM DRUM PRE2 EXT PLG2 EXIT ENTER DEC NO INC YES POWER ON OFF CS6x 2A splash screen is displayed briefly. 3The Voice or Performance Play Mode screen appears next. CS6R VCE Play) PRE1:001(A01)[Sq:Generation] EQLow-Q EQMid-G EQHi-G FLT-Rez HPF 19