Yamaha CS6R Owner's Manual - Page 92

Voice Mode s Time (Release Time) Set the Release Time. t Settings: 0 ~ 127 s Level (Release Level) Set the Release Level. t Settings: -128 ~ 0 ~ +127 (-4800 cents ~ 0 ~ +4800 cents) Pitch Envelope Generator Settings There are five Time settings (controlling the speed of changes to the sound) and five Level settings (controlling the pitch). The pitch of a note is held at the Hold Level for the length of time defined by the Hold Time. After the Hold Time has elapsed, the pitch changes in accordance with the Attack Time/Level, Decay 1/2 Time and the Decay 1 Level, then settles at the Sustain Level. When the note is released, the change in pitch is governed by the Release Time/Level settings. Velocity Sensitivity and other parameters can also be set if required. Pitch Attack Decay1 Sustain Release Level Level Level Key off Level s Center (Center Key) Set the basic pitch used by the Pitch parameter. t Settings: C-2 ~ G8 You can also set this parameter by pressing the respective note on the keyboard while holding down the [SHIFT] key. Speed of + pitch change Large Small Lower range - Center (Basic Pitch) Higher range s EGTime The EGTime parameter controls the PEG Times for each Element according to the positions of the notes on the keyboard. The Center parameter is used as the basic pitch for this parameter. A positive setting will cause the pitch of lower notes to change slower and that of higher notes to change faster. Negative values will have the opposite effect. t Settings: -64 ~ 0 ~ +63 Hold Level 0 Hold Time Attack Decay1 Decay2 Time Time Time Time Release Time PCH Scale (Pitch Scale) You can set the Pitch Scaling for each Element. Pitch Scaling is used to vary the Element pitch, PEG Levels and PEG Times according to the positions of the notes on the keyboard. PCHíKeyFlw)Pitch-Center EGTime--Center EL1234 100% C 3 +7 C 3 s Pitch Adjust the sensitivity of the Pitch Scaling for each Element according to the position of the note on the keyboard. The Center parameter is used as the basic pitch for this parameter. A positive setting will cause the pitch of lower notes to change less and that of higher notes to change more. Negative values will have the opposite effect. t Settings: -200% ~ 0 ~ +200% (At +100%, neighboring notes are pitched one semitone (100 cents) apart.) s Center (Center Key) Set the basic pitch used by the EGTime parameter. When the Center Key note is played, the PEG behaves according to its actual settings. The pitch change characteristics for other notes will vary in proportion to the EGTime settings. t Settings: C-2 ~ G8 You can also set this parameter by pressing the respective note on the keyboard while holding down the [SHIFT] key. Positive value Speed of PEG + pitch change Lower range - Basic pitch Higher range Negative value Lower range + - Basic pitch Speed of PEG pitch change Higher range 92