Yamaha CS6R Owner's Manual - Page 132

Performance Mode TON Other (Tone Other) You can set Pitch Bend Range and Velocity Sensitivity parameters for each Part. These screens are not available for the A/D Input Part. Part 1 to 16 TONíOther) Pitch Bend VelDepth-Offset Part01 -12 - +12 127 64 Offset (Velocity Offset) As illustrated below, the velocity will be increased by the specified amount. Changes to velocity curve according to VelDepth (with offset set to 64) Velocity at tone generator Offset=127 Depth=64 Offset=96 Depth=64 Offset=64 Plug-in 1/2 Part Multi Plug-in Part Phrase Clip Part Drum Voice Part TONíOther) Pitch Bend VelDepth-Offset PartP1 +12 127 64 s Pitch Bend Set the amount (in semitones) by which the Voice pitch changes when the Pitch Bend Wheel is moved. For example, a Lower setting of -12 means that the pitch of the Voice drops by up to an octave when the Pitch Bend Wheel is moved downwards. An Upper setting of +12 means that the pitch of the Voice rises by up to an octave when the Pitch Bend Wheel is moved upwards. The Lower parameter is only available for Normal Voice Parts (Parts 1 to 16). t Settings: Lower (Left): -48 ~ 0 ~ +24 Upper (Right): -48 ~ 0 ~ +24 (or -24 ~ 0 ~ +24 for Plug-in 1/2 and Multi Plug-in Parts) s VelDepth-Offset (Velocity Sensitivity Depth/Offset) Set the velocity sensitivity and velocity offset for each Part. t Settings: VelDepth (Velocity Sensitivity): 0 ~ 127 Offset (Velocity Offset): 0 ~ 127 VelDepth (Velocity Sensitivity Depth) As illustrated below, a large setting will cause large changes in velocity when you play the keyboard. Changes to velocity curve according to VelDepth (with offset set to 64) Velocity at tone generator Depth=127 Offset=64 Depth=64 Offset=64 Offset=+96 Depends on offset Depth=64 Offset=32 Offset=64 Velocity=1 Depends on offset Offset=-32 Received Velocity Part Layer You can set various MIDI parameters for each Part, including MIDI Receive Channel, Arpeggiator switch, note limit and velocity. These parameters are largely used when layering multiple Parts. The following four screens are available. LYR Mode (Layer Mode) LYR Limit (Layer Limit) LYR Tune (Layer Tune) LYR Out (Layer Out) LYR Mode (Layer Mode) You can set the method by which each Part is output. The parameters will vary according to the Part selected. Part 1 to 16 Plug-in 1/2 Part LYRíMode) Mode Part01 poly Arp Layer RcvCh on off 1 Phrase Clip Part Drum Voice Part LYRíMode) Part01 Arp Layer RcvCh on off 1 A/D Input Part Multi Plug-in Part Depth=32 Offset=64 LYRíMode) PartAD RcvCh 1 Offset=64 Depth=0 Offset=64 Received Velocity 132