Yamaha CS6R Owner's Manual - Page 178
Insert one side of the Plug-in board the connector, Press down the other side until it is securely
View all Yamaha CS6R manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 178 highlights
8 Mount the Plug-in board onto the plate as detailed in the following steps. 8-1 Insert one side of the Plug-in board (the connector side) into the hooks 1 as shown in the illustration. When installing the optional Plug-in board (from when you remove the cover to when the cover is replaced securely) all operations must be done with the AC power cord disconnected. 5 Remove the cable from the hook-shaped bundle tie on the plate. Hooks 1 Hook 1 Hook 1 8-2 Press down the other side until it is securely settled on the hooks 2. Hooks 2 6 Take out the Plug-in board from the anti-static bag. When installing the board, the side with a connector and ICs must be on top. 7 Carefully plug the cable connector into the Plug-in board connector until the two notches on the cable connector lock into the sockets on the board as shown in the illustration. Hooks 2 9 Fix the connector cable to the hook-shaped bundle tie on the plate. Appendix ) Replace the Plug-in board cover by fastening the eight flat-head screws you removed in the step 3 above. Use a coin or a Phillips screwdriver to secure the cover. 178