Yamaha CS6R Owner's Manual - Page 94

Voice Mode • HPF (High Pass Filter) This only passes signals above the Cutoff frequency. You can then use the Reso (Resonance) parameter to add further character to the sound. Two types of HPF are available. Level Cutoff -12db/oct -24db/oct Frequency HPF24D (High Pass Filter 24dB/oct Digital), A 4-pole (-24db/oct) dynamic HPF with a strong Resonance. Resonance HPF12(High Pass Filter 12dB/oct), A 2-pole (-12db/oct) dynamic HPF. Resonance • BPF (Band Pass Filter) This only passes a band of signals around the Cutoff frequency. The width of this band can be varied. Three types of BPF are available. Level Cutoff range Range passed Cutoff range BPF6 (Band Pass Filter 6dB/oct) The combination of a -6dB/oct HPF and LPF. Level Cutoff range Range passed Cutoff range -6db/oct Frequency BPF12D (Band Pass Filter 12dB/oct Digital) The combination of a -12dB/oct HPF and LPF. Level Cutoff Range Range passed Cutoff Range -12db/oct Frequency BPFW (Band Pass Filter Wide) Also the combination of a -12dB/oct HPF and LPF, but can have a wider frequency band than the BPF12D filter. Level Cutoff range Range passed Cutoff range width can be increased Frequency • BEF (Band Elimination Filter) This attenuates a band of signals around the Cutoff frequency, but passes everything else. BEF6 (Band Elimination Filter 6dB/oct) Level Range passed Cutoff range Range passed Center frequency Frequency • THRU The filters are bypassed and the entire signal is unaffected. Center frequency Frequency s Gain Set the Gain (the amount of boost applied to the signal sent to the Filter Unit). t Settings: 0 ~ 255 94