Dell PowerConnect J-8216 Hardware Guide - Page 52
Network Port LEDs in a J-EX8200 Switch, Status LEDs on 48-port RJ-45 Line Card
View all Dell PowerConnect J-8216 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 52 highlights
Dell PowerConnect J-Series J-EX8216 Ethernet Switch Hardware Guide Figure 20: Status LEDs on 48-port RJ-45 Line Card Table 18 on page 36 describes the status LEDs on line cards for the J-EX8200 switch, their colors and state, and the status they indicate. Table 18: Status LEDs on Line Cards for J-EX8200 Switches LED Color State and Description ON Green The line card is enabled/online. Yellow The line card is disabled/offline. Unlit There is no power being supplied to the line card. ST Green • On steadily-The line card is functioning normally. • Blinking-The line card is booting. Yellow • On steadily-There is a line card failure or alarm. • Blinking-The line card is in diagnostic mode. Unlit The line card is disabled/offline. Related • 8-port SFP+ Line Card in a J-EX8200 Switch on page 32 Documentation • 48-port SFP Line Card in a J-EX8200 Switch on page 33 • 48-port RJ-45 Line Card in a J-EX8200 Switch on page 34 • Network Port LEDs in a J-EX8200 Switch on page 36 Network Port LEDs in a J-EX8200 Switch Each network port on the faceplate of a line card in a J-EX8200 switch has two LEDs. Figure 21 on page 37 shows the network port LEDs on an 8-port SFP+ line card. 36