Dell PowerConnect J-8216 Hardware Guide - Page 58

Dell PowerConnect J-Series J-EX8216 Ethernet Switch Hardware Guide redundancy configuration. For details about different switch configurations, see "J-EX8216 Switch Configurations" on page 7. The following tables list the N+N power requirements for different AC power supplies: • Table 23 on page 42-Lists the N+N power requirements of J-EX8216 switch configurations that use 2000 W AC power supplies. • Table 24 on page 42-Lists the N+N power requirements of J-EX8216 switch configurations that use 3000 W AC power supplies. Table 23: N+N Power Supply Requirements for J-EX8216 Switch Configurations Using 2000 W AC Power Supplies Switch Configuration Input Voltage Power Supplies Needed (N) Power Supplies Needed for N+N No line cards High line (200-240 VAC) 1 2 installed Low line (100-120 VAC) 2 4 Fully loaded with 8-port SFP+ line cards High line (200-240 VAC) Low line (100-120 VAC) 5 Not supported Not supported Not supported Table 24: N+N Power Supply Requirements for J-EX8216 Switch Configurations Using 3000 W AC Power Supplies Switch Configuration Input Voltage Power Supplies Needed (N) Power Supplies Needed for N+N No line cards High line (200-240 VAC) 1 2 installed Fully loaded with High line (200-240 VAC) 3 6 8-port SFP+ line cards Related • AC Power Specifications for J-EX8200 Switches on page 81 Documentation • AC Power Supply LEDs in a J-EX8200 Switch on page 42 • Calculating Power Requirements for a J-EX8216 Switch on page 85 • Installing an AC Power Supply in a J-EX8200 Switch on page 114 • Removing an AC Power Supply from a J-EX8200 Switch on page 157 AC Power Supply LEDs in a J-EX8200 Switch An AC power supply has three LEDs on its faceplate. These LEDs display information about the status of the power supply. See Figure 26 on page 43. 42