Dell PowerEdge SC440 Hardware Owner's Manual - Page 16
System Messages - memory
View all Dell PowerEdge SC440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 16 highlights
Table 1-5. Diagnostic Indicator Codes (continued) Code Causes Possible video failure. Corrective Action See "Getting Help" on page 107. Diskette drive or hard drive failure. Possible USB failure. Ensure that the diskette drive and hard drive are properly connected. See "Hard Drives" on page 51 or "Diskette Drive" on page 44 for information on the drives installed in your system. See "Troubleshooting a USB Device" on page 82. No memory modules detected. See "Troubleshooting System Memory" on page 87. System board failure. See "Getting Help" on page 107. Memory configuration See "Troubleshooting System Memory" on error. page 87. Possible system board resource and/or system board hardware failure. See "Getting Help" on page 107. Possible system resource See "Troubleshooting IRQ Assignment configuration error. Conflicts" on page 80. If the problem persists, see "Getting Help" on page 107. Other failure. Ensure that the diskette drive, optical drive, and hard drives are properly connected. See "Troubleshooting Your System" on page 79 for the appropriate drive installed in your system. If the problem persists, see "Getting Help" on page 107. System Messages System messages appear on the screen to notify you of a possible problem with the system. Table 1-6 lists the system messages that can occur and the probable cause and corrective action for each message. NOTE: If you receive a system message that is not listed in Table 1-6, check the documentation for the application that is running when the message appears or the operating system's documentation for an explanation of the message and recommended action. 16 About Your System