Dell PowerEdge SC440 Hardware Owner's Manual - Page 73
Bezel (Service Only Parts Procedure), Removing the Bezel
View all Dell PowerEdge SC440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
Bezel (Service Only Parts Procedure) Removing the Bezel CAUTION: Only trained service technicians are authorized to remove the system cover and access any of the components inside the system. Before performing any procedure, see your Product Information Guide for complete information about safety precautions, working inside the computer and protecting against electrostatic discharge. 1 Turn off the system and attached peripherals, and disconnect the system from the electrical outlet. 2 Open the system. See "Opening the System" on page 41. 3 Remove the heat sink and shroud assembly. See "Removing the Processor" on page 62. Do not remove the processor, however. 4 Remove the large processor cooling fan. See "Removing the Cooling Fans" on page 65. 5 Remove the three bezel release screws. See Figure 3-21. 6 Slide the bezel toward the top of the system, then lift it outward. Installing System Components 73