Dell PowerEdge SC440 Hardware Owner's Manual - Page 66
Slide the fan toward the back panel and lift the fan out.
View all Dell PowerEdge SC440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 66 highlights
3 Disconnect the fan's power cable from the system board. See Figure 3-17. 4 If you are removing the smaller card cage fan (see Figure 3-17): a Pull up on the single release tab that attaches the fan to the chassis. b Slide the fan toward the back panel and lift the fan out. 5 If you are removing the larger processor cooling fan (see Figure 3-17): a Remove the heat sink and shroud assembly. See "Removing the Processor" on page 62. Do not remove the processor, however. b Press the release tab that attaches the processor cooling fan to the chassis. c Slide the fan toward the back panel and lift the fan out. Figure 3-17. Removing and Installing the Cooling Fans 2 1 3 4 6 5 1 processor cooling fan 2 release tab for processor fan 3 connector for processor fan (CPU_CAGE) 4 connector for card cage fan 5 release tab for card cage fan 6 card cage fan (FAN_CARD_CAGE) 66 Installing System Components