Dell PowerEdge SC440 Hardware Owner's Manual - Page 72
Installing the Chassis Intrusion Switch, Reconnect the system to the electrical outlet
View all Dell PowerEdge SC440 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 72 highlights
Figure 3-20. Removing and Installing the Chassis Intrusion Switch 1 2 3 1 chassis intrusion switch 2 securing bracket notch 3 INTRUDER connector Installing the Chassis Intrusion Switch 1 Align the chassis intrusion switch with the securing bracket notch. See Figure 3-20. 2 Slide the switch into the securing bracket notch. 3 Connect the switch cable to the INTRUDER connector on the system board. 4 Close the system. See "Closing the System" on page 41. 5 Reconnect the system to the electrical outlet, and turn on the system. 72 Installing System Components
72
Installing System Components
Figure 3-20.
Removing and Installing the Chassis Intrusion Switch
Installing the Chassis Intrusion Switch
1
Align the chassis intrusion switch with the securing bracket notch. See Figure 3-20.
2
Slide the switch into the securing bracket notch.
3
Connect the switch cable to the INTRUDER connector on the system board.
4
Close the system. See "Closing the System" on page 41.
5
Reconnect the system to the electrical outlet, and turn on the system.
1
chassis intrusion switch
2
securing bracket notch
3
INTRUDER connector
1
2
3