Epson PhotoPC 850Z User Manual - Page 160
Adjusting Camera Settings From Your Computer, Changing Settings With Image Expert
![]() |
View all Epson PhotoPC 850Z manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 160 highlights
You can use the Mode, Flash, Self Timer, and Macro controls on the screen to adjust these settings just as you would by using the buttons or LCD menus on the camera. 6 When your shot is ready, click Take a Picture. The image is captured and processed. 7 Click Close when you're finished taking pictures from your computer. The Auto-Stop Timer shuts off the live preview after one minute to save battery power. You can set the timer from . 30 seconds to 5 minutes. NOTE If you have an external flash unit attached and have changed the flash setting to EXT (external), you can't change the flash mode. To change the setting back to INT so you can use the camera's built-in flash, see page A-5. Adjusting Camera Settings From Your Computer You can use either Image Expert or EPSON Photo!3 to change the following camera settings: Time Date Camera ID Connection Port Connection Speed Changing Settings With Image Expert You can change settings in Image Expert while you're viewing pictures in the camera. Follow these steps: 1 Connect the camera to your computer as described in Chapter 8. 2 Turn the camera dial to , then turn on your computer system. A B12 Operating the Camera From Your Computer 12-5
![](/manual_guide/products/epson-photopc-850z-user-manual-9cb6a97/160.png)