HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 104

dot1x pae Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands dot1x pae Use the dot1x pae interface configuration command to configure the port as an IEEE 802.1x port access entity (PAE) authenticator. Use the no form of this command to disable IEEE 802.1x authentication on the port. dot1x pae authenticator no dot1x pae Syntax Description This command has no arguments or keywords. Defaults The port is not an IEEE 802.1x PAE authenticator, and IEEE 802.1x authentication is disabled on the port. Command Modes Interface configuration Command History Release 12.2(25)SEE 12.2(25)SEF Modification This command was introduced. This command was introduced. Usage Guidelines Use the no dot1x pae interface configuration command to disable IEEE 802.1x authentication on the port. When you configure IEEE 802.1x authentication on a port, such as by entering the dot1x port-control interface configuration command, the switch automatically configures the port as an EEE 802.1x authenticator. After the no dot1x pae interface configuration command is entered, the Authenticator PAE operation is disabled. Examples This example shows how to disable IEEE 802.1x authentication on the port: Switch(config-if)# no dot1x pae You can verify your settings by entering the show dot1x or show eap privileged EXEC command. Related Commands Command show dot1x show eap Description Displays IEEE 802.1x statistics, administrative status, and operational status for the switch or for the specified port. Displays EAP registration and session information for the switch or for the specified port. 2-76 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01