HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 272
queue-set
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 272 highlights
queue-set Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands queue-set Use the queue-set interface configuration command to map a port to a queue-set. Use the no form of this command to return to the default setting. queue-set qset-id no queue-set qset-id Syntax Description qset-id ID of the queue-set. Each port belongs to a queue-set, which defines all the characteristics of the four egress queues per port. The range is 1 to 2. Defaults The queue-set ID is 1. Command Modes Interface configuration Command History Release 12.2(25)SEF Modification This command was introduced. Examples This example shows how to map a port to queue-set 2: Switch(config)# interface gigabitethernet0/21 Switch(config-if)# queue-set 2 You can verify your settings by entering the show mls qos interface [interface-id] buffers privileged EXEC command. Related Commands Command mls qos queue-set output buffers mls qos queue-set output threshold show mls qos interface buffers Description Allocates buffers to a queue-set. Configures the weighted tail-drop (WTD) thresholds, guarantees the availability of buffers, and configures the maximum memory allocation to a queue-set. Displays quality of service (QoS) information. 2-244 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01