HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 125
interface vlan
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 125 highlights
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands interface vlan interface vlan Use the interface vlan global configuration command to create or access a VLAN and to enter interface configuration mode. Use the no form of this command to delete a VLAN. interface vlan vlan-id no interface vlan vlan-id Syntax Description vlan-id VLAN number. The range is 1 to 4094. Defaults The default VLAN interface is VLAN 1. Command Modes Global configuration Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines VLANs are created the first time that you enter the interface vlan vlan-id command for a particular VLAN. The vlan-id corresponds to the VLAN-tag associated with data frames on an ISL or IEEE 802.1Q encapsulated trunk or the VLAN ID configured for an access port. If you delete a VLAN by entering the no interface vlan vlan-id command, the deleted interface is no longer visible in the output from the show interfaces privileged EXEC command. Note You cannot delete the VLAN 1 interface. You can re-instate a deleted VLAN by entering the interface vlan vlan-id command for the deleted interface. The interface comes back up, but the previous configuration is gone. Examples This example shows how to create a new VLAN with VLAN ID 23 and to enter interface configuration mode: Switch(config)# interface vlan 23 Switch(config-if)# You can verify your setting by entering the show interfaces and show interfaces vlan vlan-id privileged EXEC commands. Related Commands Command show interfaces vlan vlan-id Description Displays the administrative and operational status of all interfaces or the specified VLAN. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-97