HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 659

Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug platform port-asic debug platform port-asic Use the debug platform port-asic privileged EXEC command to enable debugging of the port application-specific integrated circuit (ASIC) driver. Use the no form of this command to disable debugging. debug platform port-asic {interrupt | periodic | read | write} no debug platform port-asic {interrupt | periodic | read | write} Syntax Description interrupt periodic read write Display port-ASIC interrupt-related function debug messages. Display port-ASIC periodic-function-call debug messages. Display port-ASIC read debug messages. Display port-ASIC write debug messages. Note Though visible in the command-line help strings, the stack keyword is not supported. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines The undebug platform port-asic command is the same as the no debug platform port-asic command. Related Commands Command show debugging Description Displays information about the types of debugging that are enabled. For syntax information, see the Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-43