HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 645

Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug platform dot1x debug platform dot1x Use the debug platform dot1x privileged EXEC command to enable debugging of IEEE 802.1x events. Use the no form of this command to disable debugging. debug platform dot1x {initialization | interface-configuration | rpc} no debug platform dot1x {initialization | interface-configuration | rpc} Syntax Description initialization interface-configuration rpc Display IEEE 802.1x-authentication initialization sequence debug messages. Display IEEE 802.1x interface configuration-related debug messages. Display IEEE 802.1x remote procedure call (RPC) request debug messages. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines The undebug platform dot1x command is the same as the no debug platform dot1x command. Related Commands Command show debugging Description Displays information about the types of debugging that are enabled. For syntax information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-29