HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 385

Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac address-table static show mac address-table static Use the show mac address-table static user EXEC command to display only static MAC address table entries. show mac address-table static [address mac-address] [interface interface-id] [vlan vlan-id] [ | {begin | exclude | include} expression] Syntax Description address mac-address interface interface-id vlan vlan-id | begin | exclude | include expression (Optional) Specify a 48-bit MAC address; the valid format is H.H.H (available in privileged EXEC mode only). (Optional) Specify an interface to match; valid interfaces include physical ports and port channels. (Optional) Display addresses for a specific VLAN. The range is 1 to 4094. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show mac address-table static command: Switch> show mac address-table static Mac Address Table Vlan Mac Address Type Ports ---- ----- All 0100.0ccc.cccc STATIC CPU All 0180.c200.0000 STATIC CPU All 0100.0ccc.cccd STATIC CPU All 0180.c200.0001 STATIC CPU All 0180.c200.0004 STATIC CPU All 0180.c200.0005 STATIC CPU 4 0001.0002.0004 STATIC Drop 6 0001.0002.0007 STATIC Drop Total Mac Addresses for this criterion: 8 OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-359