HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 469
spanning-tree etherchannel guard misconfig, no spanning-tree
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 469 highlights
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands spanning-tree etherchannel guard misconfig spanning-tree etherchannel guard misconfig Use the spanning-tree etherchannel guard misconfig global configuration command to display an error message when the switch detects an EtherChannel misconfiguration. Use the no form of this command to disable the feature. spanning-tree etherchannel guard misconfig no spanning-tree etherchannel guard misconfig Syntax Description This command has no arguments or keywords. Defaults EtherChannel guard is enabled on the switch. Command Modes Global configuration Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines When the switch detects an EtherChannel misconfiguration, this error message appears: PM-4-ERR_DISABLE: Channel-misconfig error detected on [chars], putting [chars] in err-disable state. To show switch ports that are in the misconfigured EtherChannel, use the show interfaces status err-disabled privileged EXEC command. To verify the EtherChannel configuration on a remote device, use the show etherchannel summary privileged EXEC command on the remote device. When a port is in the error-disabled state because of an EtherChannel misconfiguration, you can bring it out of this state by entering the errdisable recovery cause channel-misconfig global configuration command, or you can manually re-enable it by entering the shutdown and no shut down interface configuration commands. Examples This example shows how to enable the EtherChannel guard misconfiguration feature: Switch(config)# spanning-tree etherchannel guard misconfig You can verify your settings by entering the show spanning-tree summary privileged EXEC command. OL-8916-01 Cisco Catalyst Blade Switch for HP Command Reference 2-441