HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 595

Appendix A Cisco Catalyst Switch 3020 for HP Boot Loader Commands copy copy Use the copy boot loader command to copy a file from a source to a destination. copy [-b block-size] filesystem:/source-file-url filesystem:/destination-file-url Syntax Description -b block-size filesystem: /source-file-url /destination-file-url (Optional) This option is used only for internal development and testing. Alias for a flash file system. Use flash: for the system board flash device. Path (directory) and filename (source) to be copied. Path (directory) and filename of the destination. Defaults The default block size is 4 KB. Command Modes Boot loader Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines Filenames and directory names are case sensitive. Directory names are limited to 45 characters between the slashes (/); the name cannot contain control characters, spaces, deletes, slashes, quotes, semicolons, or colons. Filenames are limited to 45 characters; the name cannot contain control characters, spaces, deletes, slashes, quotes, semicolons, or colons. If you are copying a file to a new directory, the directory must already exist. Examples This example show how to copy a file at the root: switch: copy flash:test1.text flash:test4.text . File "flash:test1.text" successfully copied to "flash:test4.text" You can verify that the file was copied by entering the dir filesystem: boot loader command. Related Commands Command delete Description Deletes one or more files from the specified file system. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-5