HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 628
debug interface
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 628 highlights
debug interface Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug interface Use the debug interface privileged EXEC command to enable debugging of interface-related activities. Use the no form of this command to disable debugging. debug interface {interface-id | null interface-number | port-channel port-channel-number | vlan vlan-id} no debug interface {interface-id | null interface-number | port-channel port-channel-number | vlan vlan-id} Syntax Description interface-id null interface-number port-channel port-channel-number vlan vlan-id Display debug messages for the specified physical port, identified by type switch number/module number/ port, for example gigabitethernet 0/2. Display debug messages for null interfaces. The interface-number is always 0. Display debug messages for the specified EtherChannel port-channel interface. The port-channel-number range is 1 to 48. Display debug messages for the specified VLAN. The vlan-id range is 1 to 4094. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines If you do not specify a keyword, all debug messages appear. The undebug interface command is the same as the no debug interface command. B-12 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01