HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 430
show system mtu, begin, exclude, system mtu, system mtu jumbo, exclude output
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 430 highlights
show system mtu Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show system mtu Use the show system mtu privileged EXEC command to display the global maximum transmission unit (MTU) or maximum packet size set for the switch. show system mtu [ | {begin | exclude | include} expression] Syntax Description | begin | exclude | include expression (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes Privileged EXEC Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines If you have used the system mtu or system mtu jumbo global configuration command to change the MTU setting, the new setting does not take effect until you reset the switch. The system MTU refers to ports operating at 10/100 Mbps; the system jumbo MTU refers to Gigabit ports; the system routing MTU refers to routed ports. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show system mtu command: Switch# show system mtu System MTU size is 1500 bytes System Jumbo MTU size is 1550 bytes Related Commands Command system mtu Description Sets the MTU size for the Fast Ethernet, Gigabit Ethernet, or routed ports. 2-404 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01