HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 439

Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show vlan Table 2-28 show vlan Command Output Fields (continued) Field RingNo BrdgNo Stp BrdgMode Trans1 Trans2 Remote SPAN VLANs Description Ring number for the VLAN, if applicable. Bridge number for the VLAN, if applicable. Spanning Tree Protocol type used on the VLAN. Bridging mode for this VLAN-possible values are source-route bridging (SRB) and source-route transparent (SRT); the default is SRB. Translation bridge 1. Translation bridge 2. Identifies any RSPAN VLANs that have been configured. This is an example of output from the show vlan summary command: Switch> show vlan summary Number of existing VLANs : 8 Number of existing VTP VLANs : 8 Number of existing extended VLANs : 0 This is an example of output from the show vlan id command. Switch# show vlan id 1 VLAN Name Status Ports 1 default active Gi0/1, Gi0/2, Gi0/3, Gi0/4 Gi0/5, Gi0/6, Gi0/7, Gi0/8 Gi0/9, Gi0/10, Gi0/11, Gi0/12 Gi0/13, Gi0/14, Gi0/15, Gi0/16 Gi0/17, Gi0/18 VLAN Type SAID MTU Parent RingNo BridgeNo Stp BrdgMode Trans1 Trans2 1 enet 100001 1500 - - - - - 0 0 Remote SPAN VLAN Disabled Primary Secondary Type Ports OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-413