HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 436
show vlan
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 436 highlights
show vlan Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show vlan Use the show vlan user EXEC command to display the parameters for all configured VLANs or one VLAN (if the VLAN ID or name is specified) on the switch. show vlan [brief | id vlan-id | mtu | name vlan-name | remote-span | summary] [ | {begin | exclude | include} expression] Syntax Description brief id vlan-id mtu name vlan-name remote-span summary | begin | exclude | include expression (Optional) Display one line for each VLAN with the VLAN name, status, and its ports. (Optional) Display information about a single VLAN identified by VLAN ID number. For vlan-id, the range is 1 to 4094. (Optional) Display a list of VLANs and the minimum and maximum transmission unit (MTU) sizes configured on ports in the VLAN. (Optional) Display information about a single VLAN identified by VLAN name. The VLAN name is an ASCII string from 1 to 32 characters. (Optional) Display information about Remote SPAN (RSPAN) VLANs. (Optional) Display VLAN summary information. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Note Though visible in the command-line help string, the ifindex, internal usage, and private-vlan keywords are not supported. Command Modes User EXEC Command History Release 12.2(25)SEF Modification This command was introduced. 2-410 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01