HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 581

Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands vmps server vmps server Use the vmps server global configuration command to configure the primary VLAN Membership Policy Server (VMPS) and up to three secondary servers. Use the no form of this command to remove a VMPS server. vmps server ipaddress [primary] no vmps server [ipaddress] Syntax Description ipaddress primary IP address or hostname of the primary or secondary VMPS servers. If you specify a hostname, the Domain Name System (DNS) server must be configured. (Optional) Decides whether primary or secondary VMPS servers are being configured. Defaults No primary or secondary VMPS servers are defined. Command Modes Global configuration Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines The first server entered is automatically selected as the primary server whether or not primary is entered. The first server address can be overridden by using primary in a subsequent command. When using the no form without specifying the ipaddress, all configured servers are deleted. If you delete all servers when dynamic-access ports are present, the switch cannot forward packets from new sources on these ports because it cannot query the VMPS. Examples This example shows how to configure the server with IP address 191.10.49.20 as the primary VMPS server. The servers with IP addresses 191.10.49.21 and 191.10.49.22 are configured as secondary servers: Switch(config)# vmps server 191.10.49.20 primary Switch(config)# vmps server 191.10.49.21 Switch(config)# vmps server 191.10.49.22 This example shows how to delete the server with IP address 191.10.49.21: Switch(config)# no vmps server 191.10.49.21 You can verify your setting by entering the show vmps privileged EXEC command and examining information in the VMPS Domain Server row. OL-8916-01 Cisco Catalyst Blade Switch for HP Command Reference 2-553