HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 366
show link state group
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 366 highlights
show link state group Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show link state group Use the show link state group global configuration command to display the link-state group information. show link state group [number] [detail] Syntax Description number detail (Optional) Number of the link-state group. (Optional) Specify that detailed information appears. Defaults There is no default. Command Modes Privileged EXEC Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines Use the show link state group command to display the link-state group information. Enter this command without keywords to display information about all link-state groups. Enter the group number to display information specific to the group. Enter the detail keyword to display detailed information about the group. The output for the show link state group detail command displays only those link-state groups that have link-state tracking enabled or that have upstream or downstream interfaces (or both) configured. If there is no link-state group configuration for a group, it is not shown as enabled or disabled. Examples This is an example of output from the show link state group 1 command: Switch> show link state group 1 Link State Group: 1 Status: Enabled, Up This is an example of output from the show link state group detail command: Switch> show link state group detail Link State Group: 1 Status: Enabled, Up Upstream Interfaces : Po1(Up) Downstream Interfaces : Gi0/3(Up) Gi0/4(Up) Link State Group: 2 Status: Disabled, Down Upstream Interfaces : Downstream Interfaces : (Up):Interface up (Dwn):Interface Down (Dis):Interface disabled 2-340 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01