HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 605

Appendix A Cisco Catalyst Switch 3020 for HP Boot Loader Commands mkdir mkdir Use the mkdir boot loader command to create one or more new directories on the specified file system. mkdir filesystem:/directory-url ... Syntax Description filesystem: /directory-url Alias for a flash file system. Use flash: for the system board flash device. Name of the directories to create. Separate each directory name with a space. Command Modes Boot loader Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines Directory names are case sensitive. Directory names are limited to 45 characters between the slashes (/); the name cannot contain control characters, spaces, deletes, slashes, quotes, semicolons, or colons. Examples This example shows how to make a directory called Saved_Configs: switch: mkdir flash:Saved_Configs Directory "flash:Saved_Configs" created This example shows how to make two directories: switch: mkdir flash:Saved_Configs1 flash:Test Directory "flash:Saved_Configs1" created Directory "flash:Test" created You can verify that the directory was created by entering the dir filesystem: boot loader command. Related Commands Command dir rmdir Description Displays a list of files and directories on the specified file system. Removes one or more directories from the specified file system. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference A-15