HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 314

show controllers tcam Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show controllers tcam Use the show controllers tcam privileged EXEC command to display the state of the registers for all ternary content addressable memory (TCAM) in the system and for all TCAM interface ASICs that are CAM controllers. show controllers tcam [asic [number]] [detail] [ | {begin | exclude | include} expression] Syntax Description asic number detail | begin | exclude | include expression (Optional) Display port ASIC TCAM information. (Optional) Display information for the specified port ASIC number. The range is from 0 to 15. (Optional) Display detailed TCAM register information. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes Privileged EXEC Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines This display provides information that might be useful for Cisco technical support representatives troubleshooting the switch. Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show controllers tcam command: Switch# show controllers tcam TCAM-0 Registers REV: 00B30103 SIZE: 00080040 ID: 00000000 CCR: 00000000_F0000020 RPID0: RPID1: RPID2: RPID3: 00000000_00000000 00000000_00000000 00000000_00000000 00000000_00000000 HRR0: HRR1: HRR2: 00000000_E000CAFC 00000000_00000000 00000000_00000000 2-288 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01