HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 335
Cisco Catalyst Blade Switch 3020 for HP Command Reference, OL-8916-01, show etherchannel
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 335 highlights
Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show etherchannel Examples This is an example of output from the show etherchannel 1 detail command: Switch> show etherchannel 1 detail Group state = L2 Ports: 2 Maxports = 16 Port-channels: 1 Max Port-channels = 16 Protocol: LACP Ports in the group Port: Gi0/1 Port state = Up Mstr In-Bndl Channel group = 1 Mode = Active Port-channel = Po1 GC = - Port index = 0 Load = 0x00 Gcchange = Pseudo port-channel = Po1 Protocol = LACP Flags: S - Device is sending Slow LACPDUs F - Device is sending fast LACPDU A - Device is in active mode. P - Device is in passive mode. Local information: Port Gi0/21 Flags State SA bndl LACP port Priority 32768 Admin Key 0x0 Oper Key 0x1 Port Number 0x0 Port State 0x3D Age of the port in the current state: 01d:20h:06m:04s Port-channels in the group Port-channel: Po1 (Primary Aggregator) Age of the Port-channel = 01d:20h:20m:26s Logical slot/port = 10/1 Number of ports = 2 HotStandBy port = null Port state = Port-channel Ag-Inuse Protocol = LACP Ports in the Port-channel: Index Load Port EC state No of bits 0 00 Gi0/21 Active 0 0 00 Gi0/22 Active 0 Time since last port bundled: 01d:20h:20m:20s Gi0/22 This is an example of output from the show etherchannel 1 summary command: Switch> show etherchannel 1 summary Flags: D - down P - in port-channel I - stand-alone s - suspended H - Hot-standby (LACP only) R - Layer3 S - Layer2 u - unsuitable for bundling U - in use f - failed to allocate aggregator d - default port Number of channel-groups in use: 1 Number of aggregators: 1 OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-309