HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 276
Reference, Release 12.2 > Server Security Protocols >
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 276 highlights
radius-server host Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Usage Guidelines We recommend that you configure the UDP port for the RADIUS accounting server and the UDP port for the RADIUS authentication server to nondefault values. You can configure the authentication and encryption key by using the radius-server host ip-address key string or the radius-server key {0 string | 7 string | string} global configuration command. Use the test username name keywords to enable automatic server testing of the RADIUS server status and to specify the username to be used. Examples This example shows how to configure 1500 as the UDP port for the accounting server and 1510 as the UDP port for the authentication server: Switch(config)# radius-server host 1.1.1.1 acct-port 1500 auth-port 1510 This example shows how to configure the UDP port for the accounting server and the authentication server, enable automated testing of the RADIUS server status, specify the username to be used, and configure a key string: Switch(config)# radius-server host 1.1.1.2 acct-port 800 auth-port 900 test username aaafail idle-time 75 key abc123 You can verify your settings by entering the show running-config privileged EXEC command. Related Commands Command Description dot1x critical (global configuration) Configures the parameters for the inaccessible authentication bypass feature. dot1x critical (interface configuration) Enables the inaccessible authentication bypass feature on an interface and configures the access VLAN to which the switch assigns the critical port when the port is in the critical-authentication state. radius-server key {0 string | 7 string | string} Sets the authentication and encryption key for all RADIUS communications between the router and the RADIUS daemon. For syntax information, select Cisco IOS Security Command Reference, Release 12.2 > Server Security Protocols > RADIUS Commands. show running-config Displays the running configuration on the switch. For syntax information, select Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 > File Management Commands > Configuration File Management Commands. 2-248 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01