HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 413

Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show parser macro show parser macro Use the show parser macro user EXEC command to display the parameters for all configured macros or for one macro on the switch. show parser macro [{brief | description [interface interface-id] | name macro-name}] [ | {begin | exclude | include} expression] Syntax Description brief description [interface interface-id] name macro-name | begin | exclude | include expression (Optional) Display the name of each macro. (Optional) Display all macro descriptions or the description of a specific interface. (Optional) Display information about a single macro identified by the macro name. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is a partial output example from the show parser macro command. The output for the Cisco-default macros varies depending on the switch platform and the software image running on the switch: Switch# show parser macro Total number of macros = 6 Macro name : cisco-global Macro type : default global # Enable dynamic port error recovery for link state # failures errdisable recovery cause link-flap errdisable recovery interval 60 Macro name : cisco-desktop Macro type : default interface # macro keywords $AVID # Basic interface - Enable data VLAN only OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-387