HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 679

Appendix B Cisco Catalyst Blade Switch 3020 for HP Debug Commands debug spanning-tree bpdu debug spanning-tree bpdu Use the debug spanning-tree bpdu privileged EXEC command to enable debugging of sent and received spanning-tree bridge protocol data units (BPDUs). Use the no form of this command to disable debugging. debug spanning-tree bpdu [receive | transmit] no debug spanning-tree bpdu [receive | transmit] Syntax Description receive transmit (Optional) Display the nonoptimized path for received BPDU debug messages. (Optional) Display the nonoptimized path for sent BPDU debug messages. Defaults Debugging is disabled. Command Modes Privileged EXEC Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines The undebug spanning-tree bpdu command is the same as the no debug spanning-tree bpdu command. Related Commands Command show debugging show spanning-tree Description Displays information about the types of debugging that are enabled. For syntax information, select Cisco IOS Release 12.2 Configuration Guides and Command References > Cisco IOS Configuration Fundamentals Configuration Guide, Release 12.2 > System Management > Troubleshooting and Fault Management. Displays spanning-tree state information. OL-8916-01 Cisco Catalyst Blade Switch 3020 for HP Command Reference B-63