HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 368

show mac access-group Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mac access-group Use the show mac access-group user EXEC command to display the MAC access control lists (ACLs) configured for an interface or a switch. show mac access-group [interface interface-id] [ | {begin | exclude | include} expression] Syntax Description interface interface-id | begin | exclude | include expression (Optional) Display the MAC ACLs configured on a specific interface. Valid interfaces are physical ports and port channels; the port-channel range is 1 to 48 (available only in privileged EXEC mode). (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear. Examples This is an example of output from the show mac-access group user EXEC command. In this display, port 2 has the MAC access list macl_e1 applied; no MAC ACLs are applied to other interfaces. Switch> show mac access-group Interface GigabitEthernet0/1: Inbound access-list is not set Interface GigabitEthernet0/2: Inbound access-list is macl_e1 Interface GigabitEthernet0/3: Inbound access-list is not set Interface GigabitEthernet0/4: Inbound access-list is not set This is an example of output from the show mac access-group interface gigabitethernet0/1 command: Switch# show mac access-group interface gigabitethernet0/1 Interface GigabitEthernet0/1: Inbound access-list is macl_e1 2-342 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01