HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 400

show mls qos queue-set Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands show mls qos queue-set Use the show mls qos queue-set user EXEC command to display quality of service (QoS) settings for the egress queues. show mls qos queue-set [qset-id] [ | {begin | exclude | include} expression] Syntax Description qset-id | begin | exclude | include expression (Optional) ID of the queue-set. Each port belongs to a queue-set, which defines all the characteristics of the four egress queues per port. The range is 1 to 2. (Optional) Display begins with the line that matches the expression. (Optional) Display excludes lines that match the expression. (Optional) Display includes lines that match the specified expression. Expression in the output to use as a reference point. Command Modes User EXEC Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines Expressions are case sensitive. For example, if you enter | exclude output, the lines that contain output do not appear, but the lines that contain Output appear.nway Examples This is an example of output from the show mls qos queue-set command: Switch> show mls qos queue-set Queueset: 1 Queue : 1 2 3 4 buffers : 25 25 25 25 threshold1: 100 200 100 100 threshold2: 100 200 100 100 reserved : 50 50 50 50 maximum : 400 400 400 400 Queueset: 2 Queue : 1 2 3 4 buffers : 25 25 25 25 threshold1: 100 200 100 100 threshold2: 100 200 100 100 reserved : 50 50 50 50 maximum : 400 400 400 400 2-374 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01