HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 30
Defaults, Command Modes, Command History, Usage Guidelines, Examples, Related Commands, Release
View all HP Cisco Catalyst Blade Switch 3020 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 30 highlights
aaa accounting dot1x Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands radius tacacs+ (Optional) Enable RADIUS authorization. (Optional) Enable TACACS+ accounting. Defaults AAA accounting is disabled. Command Modes Global configuration Command History Release 12.2(25)SEF Modification This command was introduced. Usage Guidelines This command requires access to a RADIUS server. We recommend that you enter the dot1x reauthentication interface configuration command before configuring IEEE 802.1x RADIUS accounting on an interface. Examples This example shows how to configure IEEE 802.1x accounting: Switch(config)# aaa new-model Switch(config)# aaa accounting dot1x default start-stop group radius Note The RADIUS authentication server must be properly configured to accept and log update or watchdog packets from the AAA client. Related Commands Command Description aaa authentication dot1x Specifies one or more AAA methods for use on interfaces running IEEE 802.1x. aaa new-model Enables the AAA access control model. For syntax information, see the Cisco IOS Security Command Reference, Release 12.2 > Authentication, Authorization, and Accounting > Authentication Commands. dot1x reauthentication Enables or disables periodic reauthentication. dot1x timeout reauth-period Sets the number of seconds between re-authentication attempts. Cisco Catalyst Blade Switch 3020 for HP Command Reference 2-2 OL-8916-01