HP Cisco Catalyst Blade Switch 3020 Cisco Catalyst Blade Switch 3020 for HP Co - Page 274

radius-server dead-criteria Chapter 2 Cisco Catalyst Blade Switch 3020 for HP Cisco IOS Commands Examples This example shows how to configure 60 as the time and 10 as the number of tries, the conditions that determine when a RADIUS server is considered unavailable Switch(config)# radius-server dead-criteria time 60 tries 10 You can verify your settings by entering the show running-config privileged EXEC command. Related Commands Command Description dot1x critical (global configuration) Configures the parameters for the inaccessible authentication bypass feature. dot1x critical (interface configuration) Enables the inaccessible authentication bypass feature on an interface and configures the access VLAN to which the switch assigns the critical port when the port is in the critical-authentication state. radius-server retransmit retries Specifies the number of times that the switch tries to reach the RADIUS servers before considering the servers to be unavailable. For syntax information, select Cisco IOS Security Command Reference, Release 12.2 > Server Security Protocols > RADIUS Commands. radius-server timeout seconds Specifies the time in seconds during which the switch waits for a RADIUS server to respond before the IEEE 802.1x authentication times out. For syntax information, select Cisco IOS Security Command Reference, Release 12.2 > Server Security Protocols > RADIUS Commands. show running-config Displays the running configuration on the switch. For syntax information, select Cisco IOS Configuration Fundamentals Command Reference, Release 12.2 > File Management Commands > Configuration File Management Commands. 2-246 Cisco Catalyst Blade Switch 3020 for HP Command Reference OL-8916-01