HP Cluster Platform Interconnects v2010 HP Cluster Platform InfiniBand Interco - Page 56
Verifying the Shipment, ISR 9096 Accessories Box
View all HP Cluster Platform Interconnects v2010 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 56 highlights
Figure 4-5 ISR 9096 Accessories Box 1 2 4 3 5 Item Description 1 Ground stud kit 2 Console cable 3 ISR 9096 Product CD and other CDs, depending on system configuration 4 Power cable 5 Tray screws kit 4. Configurations that include cable management will also have the following items in the accessories box: • Cabling guide bracket for cable management. • Cable management screws. 5. Remove all of the above components and the foam grips from the top of the chassis. 6. Holding the remaining foam grips on each side, remove the ISR 9096 chassis from the box and place it on a flat surface. 4.2.3 Verifying the Shipment The chassis is shipped in a rigid container with the SFU-4 and SFU-8 fan modules installed in the front of the chassis, and the sCTRL board in the rear. Additional boards and optional components are shipped in a separate carton. A shipment typically contains the following items in addition to the chassis: • Generic brackets for rack mounting. These brackets are not used in an HP Cluster Platform configuration. use only the HP 10000-series rack mounting kit that is provided with the HP Cluster Platform. • Generic cable guide hooks that are not used in an HP cluster platform installation. Use only the cable guide hooks supplied with the HP Cluster Platform. • Product CD and printed documentation. This documentation is superseded by the HP Cluster Platform documentation, unless otherwise stated in this guide. • sFB-12 fabric modules. • sLB-24 line modules. • sMB management modules (one or more). • sPSU power supply modules (one or more) • Other field replaceable units (FRUs) might be shipped in an additional cardboard carton. Check for loose parts or any visible damage to the contents. If any damaged or missing parts have been detected, notify your HP sales representative. 56 Installing and Maintaining the ISR 9096 and ISR 9288 Interconnects