HP Officejet Pro 6830 User Guide - Page 84

Test the wireless connection, Turn on or off the wireless capability of the printer

Page 84 highlights

To change from a wireless connection to a USB or Ethernet connection (Windows) ● Connect the USB or Ethernet cable to the printer. To change from a wireless connection to a USB or Ethernet connection (OS X) Add the printer to the print queue. 1. Open System Preferences . 2. Depending on your operating system, click Print & Fax , Print & Scan , or Printers & Scanners in the Hardware section. 3. Click + below the list of printers at the left. 4. Select the printer from the list of detected printers, and click Add. Test the wireless connection Print the wireless test report for information about the printer wireless connection. The wireless test report provides information about the printer status, hardware (MAC) address, and IP address. If the printer is connected to a network, the test report displays details about the network settings. To print the wireless test report 1. From the printer control panel, touch button). (the Wireless button), and then touch (the Settings 2. Touch Print Reports 3. Touch Wireless Test Report. Turn on or off the wireless capability of the printer The blue Wireless light on the printer control panel is lit when the wireless capability of the printer is on. NOTE: Connecting an Ethernet cable to the printer automatically turns off the wireless capability and the Wireless light. 1. From the printer control panel, touch Setup and then touch Network Setup. 2. Touch Wireless Settings. 3. Touch Wireless to turn it on or off. Change network settings From the printer control panel, you can set up and manage your printer' wireless connection and perform a variety of network management tasks. This includes viewing and changing network settings, restoring network defaults, and turning the wireless function on or off. CAUTION: Network settings are provided for your convenience. However, unless you are an advanced user, you should not change some of these settings (such as the link speed, IP settings, default gateway, and firewall settings). 72 Chapter 8 Network setup ENWW

  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
  • 73
  • 74
  • 75
  • 76
  • 77
  • 78
  • 79
  • 80
  • 81
  • 82
  • 83
  • 84
  • 85
  • 86
  • 87
  • 88
  • 89
  • 90
  • 91
  • 92
  • 93
  • 94
  • 95
  • 96
  • 97
  • 98
  • 99
  • 100
  • 101
  • 102
  • 103
  • 104
  • 105
  • 106
  • 107
  • 108
  • 109
  • 110
  • 111
  • 112
  • 113
  • 114
  • 115
  • 116
  • 117
  • 118
  • 119
  • 120
  • 121
  • 122
  • 123
  • 124
  • 125
  • 126
  • 127
  • 128
  • 129
  • 130
  • 131
  • 132
  • 133
  • 134
  • 135
  • 136
  • 137
  • 138
  • 139
  • 140
  • 141
  • 142
  • 143
  • 144
  • 145
  • 146
  • 147
  • 148
  • 149
  • 150
  • 151
  • 152
  • 153
  • 154
  • 155
  • 156
  • 157
  • 158
  • 159
  • 160
  • 161
  • 162
  • 163
  • 164
  • 165
  • 166
  • 167
  • 168
  • 169
  • 170
  • 171
  • 172
  • 173
  • 174
  • 175
  • 176
  • 177
  • 178
  • 179
  • 180
  • 181
  • 182
  • 183
  • 184
  • 185
  • 186

To change from a wireless connection to a USB or Ethernet connection (Windows)
Connect the USB or Ethernet cable to the printer.
To change from a wireless connection to a USB or Ethernet connection (OS X)
Add the printer to the print queue.
1.
Open
System Preferences
.
2.
Depending on your operating system, click
Print & Fax
,
Print & Scan
, or
Printers & Scanners
in the
Hardware
section.
3.
Click + below the list of printers at the left.
4.
Select the printer from the list of detected printers, and click
Add
.
Test the wireless connection
Print the wireless test report for information about the printer wireless connection. The wireless test report
provides information about the printer status, hardware (MAC) address, and IP address. If the printer is
connected to a network, the test report displays details about the network settings.
To print the wireless test report
1.
From the printer control panel, touch
(the Wireless button), and then touch
(the
Settings
button).
2.
Touch
Print Reports
3.
Touch
Wireless Test Report
.
Turn on or off the wireless capability of the printer
The blue Wireless light on the printer control panel is lit when the wireless capability of the printer is on.
NOTE:
Connecting an Ethernet cable to the printer automatically turns off the wireless capability and the
Wireless light.
1.
From the printer control panel, touch
Setup
and then touch
Network Setup
.
2.
Touch
Wireless Settings
.
3.
Touch
Wireless
to turn it on or off.
Change network settings
From the printer control panel, you can set up and manage your printer' wireless connection and perform a
variety of network management tasks. This includes viewing and changing network settings, restoring
network defaults, and turning the wireless function on or off.
CAUTION:
Network settings are provided for your convenience. However, unless you are an advanced user,
you should not change some of these settings (such as the link speed, IP settings, default gateway, and
firewall settings).
72
Chapter 8
Network setup
ENWW