HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 101
Removal and replacement procedures, Removing the 2U Bottom Plastic Air Baffle
![]() |
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 101 highlights
Figure 83 Removing the 2U Bottom Plastic Air Baffle 7. Loosen the 4 screws to release the adapter board bracket from the system board tray. 8. Remove the adapter board bracket from the system board tray. Figure 84 Removing the Adapter Board Bracket from the System Board Tray 9. Press the tab to release the onboard SATA cable guard/battery holder from the system board tray. 10. Move the onboard SATA cable guard/battery holder in the direction as shown in figure below, and lift it away from the system board. Removal and replacement procedures 101
![](/manual_guide/products/hewlettpackard-proliant-dl170e-hp-proliant-dl170e-g6-server-maintenance-service-guide-4b5be1d/101.png)
Removal and replacement procedures
101
Figure 83
Removing the 2U Bottom Plastic Air Baffle
7.
Loosen the 4 screws to release the adapter board bracket from the system board tray.
8.
Remove the adapter board bracket from the system board tray.
Figure 84
Removing the Adapter Board Bracket from the System Board Tray
9.
Press the tab to release the onboard SATA cable guard/battery holder from the system board
tray.
10.
Move the onboard SATA cable guard/battery holder in the direction as shown in figure below,
and lift it away from the system board.