HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 139
System board removal and replacement procedure, Removal and replacement procedures
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 139 highlights
System board removal and replacement procedure The following removal and replacement procedures of the system board use the 1U node as examples. To remove the 1U system board: 1. Power off the node. 2. Disconnect all external cables. 3. Press the release button to release the retaining latch from the 1U system board tray. 4. Route the handle of the system board tray downwards to release the 1U system board tray from the server chassis. Figure 150 Releasing the Retaining Latch of 1U System Board Tray 5. Slide the 1U system board assembly out of the chassis. Figure 151 Removing the 1U System Board Assembly 6. Remove the 1U PCIe assembly as shown in Figure 71. 7. Remove all necessary cables from the system board. Removal and replacement procedures 139