HP ProLiant DL170e HP ProLiant DL170e G6 Server Maintenance and Service Guide - Page 102
Removing the Onboard SATA Cable Guard/Battery Holder from the 2U Node
![]() |
View all HP ProLiant DL170e manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
Figure 85 Removing the Onboard SATA Cable Guard/Battery Holder from the 2U Node 11. Unplug the Mini SAS to Mini SATA cables from the adapter board and the system board. Figure 86 Removing the Mini SAS to Mini SATA Cables from the 2U Node 12. Align the onboard SATA cable guard/battery holder to the stand offs on the system board tray and install it in the direction as shown below. Make sure the tab is inserted to the slot. Removal and replacement procedures 102
![](/manual_guide/products/hewlettpackard-proliant-dl170e-hp-proliant-dl170e-g6-server-maintenance-service-guide-4b5be1d/102.png)
Removal and replacement procedures
102
Figure 85
Removing the Onboard SATA Cable Guard/Battery Holder from the 2U Node
11.
Unplug the Mini SAS to Mini SATA cables from the adapter board and the system board.
Figure 86
Removing the Mini SAS to Mini SATA Cables from the 2U Node
12.
Align the onboard SATA cable guard/battery holder to the stand offs on the system board tray
and install it in the direction as shown below. Make sure the tab is inserted to the slot.